Cannon Patching Frame

Cannon Patching FramesA high density patching frame with exceptional cable capacity.

A versatile, user-friendly patching frame enabling maximum density of patch panels throughout the patching field combined with large volumes of cable. Cable management arms guide cables being fed from patch panels to the vertical cable trunking.

Features

Features

  • Ideal for both back bone and patching cables of Cat 6 or higher specification
  • Easy to use - Every 'u' space can be filled with patch panels
  • No need for intermediate cable rings within the 'u' positions
  • 100% patch panel availability
  • Cable management fingers at each 'u' height on both sides of patching field
  • Additional quick fit cable rings to assist with cable support, routing and containment
  • Can be used as a single patching frame or quickly bayed in multiples
  • Upper and lower cable troughs for cable routing and separation
  • No sharp edges or tight bends so cables are protected

Options/Upgrades

  • Optional cover panels
  • Optional front door kits of vertically-split (wardrobe) opening 180º (see Order Codes tab)
  • Try "CannonWrap" for quick and easy cable tie. Soft on critical high speed cable.

Cladding

  • Cladding panels are available to upgrade the standard Patching Frame to meet your specific requirements
  • Side panels are screw fixed
  • All other panels have hinge pins each side, which are spring loaded allowing left or right hand opening or quick removal

Cladding - Corner Patching Cover Panel

  • The Corner Patching Cover Panel is supplied as a left hand or right hand kit
  • Heights: 42U, 45U and 47U

Cladding - Front Patching Cover Panel

  • The Front Patching Cover Panel is for use when Patching Frames are bayed together
  • The Front Patching Cover Panel can be fitted on either the right or left hand side
  • Heights: 42U, 45U and 47U

Cladding - Patching Front Door

  • The Smart range of Split Doors are able to be fitted to the front of the Cannon Patch
  • Door Kit supplied with door when ordered
  • Heights: 42U, 45U and 47U

Cladding - Patching Front Panel

  • The Patching Front Panel is an alternative option to Split Doors, and is fitted to the front of the Cannon Patch
  • Plain steel panel
  • Heights: 42U, 45U and 47U​

Specification

Specification

  • Robust individual patching frame
  • Heights: 42U, 45U & 47U, Usable Patching Field
  • Widths/Depths: 800 wide x 600 deep; 800 wide x 450 deep
  • Can be installed; side by side or back to back with easy baying kits
  • Bolt down features in base
  • Designed to accommodate 45 x 1u, 24 port patching panels
  • No need for horizontal cable management panels
  • 1U cable fingers at every "u", up each side of patching field
  • Optional cable rings in vertical cable ways for enhanced containment (choice of orientation)
  • Large apertures in base and top for easy entry of bulk cables
  • Earthing points
  • Quick loop feature on all rear cable tray to speed cable installation
  • Delivered on transit castor for easy logistics
  • Finish: Powder painted Velvet Black to RAL 9005 or Chameleon (Grey White) to RAL 9002. Other colours available on request. 

RAFt for Patching Frame

This RAFt (Raised Access Floor technology) assembly can be used for Cannon Patching Frame:

  • 800mm wide x 450mm deep
  • 800mm wide x 600mm deep

Each RAFt Supplied with two RAFt Braces 

RAFt Base Brush Entry for Patching Frame

The RAFt Base Brush Entry can be used in conjunction with the Cannon Patching Frame RAFt to provide air management at the base of the Patching Frame

The RAFt Base Brush Entry comprises of a central steel blanking place and two pieces o brush strip to allow cabling one piece of brush strip is fitted on each side left and right of the plate. 

  • 800mm wide x 450mm deep
  • 800mm wide x 600mm deep 

Order Codes

Order Codes

Corner Patching Cover Panel

Height

Right Hand

Left Hand

42U KP5242 KP5142
45U KP5245 KP5145
47U KP5247 KP5147

Front Patching Cover Panel

Description

Order Code

42U KP5042
45U KP5045
47U KP5047

Baying Kits

Description

Order Code

Baying Kit KP0236

Patching Front Door

Description

Order Code

42U Split Door Kit KP5442
45U Split Door Kit KP5445
47U Split Door Kit KP5447

Patching Front Panel

Description

Order Code

42U Kit KP5342
45U Kit KP5345
47U Kit KP5347
 

Case Studies

Downloads

Back to ListingPreviousNext