Smart PDU - Metered / Monitored & Sequentially Switched

Location:

Products

CannonGuard

CannonPower

Features

As Smart PDU - Metered / Monitored plus:

The Smart PDU control module provides the facility to remotely switch ON or OFF any of up to ten individual power outlets, with each outlet rated from 10A@230Vac through to 16A@230Vac, via a variety of outlets from IEC sockets.
Dramatically reduces turn-on loads for staggering the start up points of each piece of equipment in the system therefore less likelihood of an MCB being triggered/activated
Saves time and a management effort when start/restarting complex systems
No need to turn off equipment to restart it - one click and the Smart PDU auto sequences the power in your racks, from your desk
Out of tolerance alarms and the ability to turn off and on any socket outlet is available when integrated into a CannonGuard system

Specification

32A Input
10 x 10A IEC Outputs
Sequential start-up
Remote on/off switching
Voltage level monitoring
Current level monitoring (per socket and cumulative)
KWh recording (per socket and cumulative)
Under/over voltage monitoring and alarms via CannonView and SNMP traps (per socket and cumulative)
Under/over current monitoring and alarms via CannonView and SNMP traps (per socket and cumulative)
1 x Temperature sensor input with remote monitoring via CannonView and SNMP
1 x Humidity sensor input with remote monitoring via CannonView and SNMP
4 x Digital inputs
2 x Change over relay outputs (1A @ 30Vdc)

Requires:

Rack Monitor/Master Controller for remote management

Connects with:

The module provides full remote control if required, and can be interconnected to the Rack Monitor / Master Controller by way of the communications connectors, as such each module is fitted with two RJ45 connectors such that when used in an integrated control system, any additional control modules can easily be connected via a daisy chain method

Power:

230Vac / 32A