Location:

Products    CannonGuard    CannonPower    Smart PDU - Metered / Monitored

Smart PDU - Metered / Monitored

Features

• The Smart PDU is equipped to continuously monitor the voltage and current levels for each outlet and provides individual metering for each outlet.
• The Smart PDU continuously monitors, and provides full fault detection automatically generating, and transmitting alarm signals via the Master Controller to the allocated remote monitoring station.
• The system also provides the facility to connect and locally monitor both temperature and humidity which can be used to raise a local or remote alarm when the environmental conditions exceed the preset boundaries

See the Cannon SensorHub for more sensor capacity

Specification

• 32A Input
• 10 x 10A IEC C13 Outputs
• Voltage level monitoring
• Current level monitoring (per socket and cumulative)
• KWh recording (per socket and cumulative)
• Under/over voltage monitoring and alarms via CannonView and SNMP traps (per socket and cumulative)
• Under/over current monitoring and alarms via CannonView and SNMP traps (per socket and cumulative)
• 1 x Temperature sensor input with remote monitoring via CannonView and SNMP
• 1 x Humidity sensor input with remote monitoring via CannonView and SNMP
• 4 x Digital inputs
• 2 x Change over relay outputs (1A @ 30Vdc)
• 19-inch Mounted (Zero 'U' mounting available with the addition of brackets)

Requires:

Rack Monitor/Master Controller for remote management 

Connects with:

The module provides full remote control if required, and can be interconnected to the Rack Monitor / Master Controller by way of the communications connectors, as such each module is fitted with two RJ45 connectors such that when used in an integrated control system, any additional control modules can easily be connected via a daisy chain method

Power:

230Vac / 32A

IEC EN 60309-1

BS4343 connector