Metered/Monitored Power Distribution Units

Cannon's range of Smart PDUs continuously monitors the input and output voltages. The system provides full fault detection that automatically generates and transmits alarm signals via a Net/IP or Master Controller to the allocated remote monitoring station. The system also provides the facility to connect and locally monitor both temperature and humidity which can be used to raise a local or remote alarm when the environmental conditions exceed the preset boundaries.

Specification

• Compliant with BS EN 60950-1:2006,TUV # LO479 & LO480
• 32A Input, EN 60309-1 (16A conversion plug / lead available)
• IEC C13 and C19 Outlets available
• Voltage level monitoring
• Current level monitoring (per socket / group and cumulative)
• KWh recording (per socket / group and cumulative)
• Under/over voltage monitoring and alarms via CannonView and SNMP traps
• Under/over current monitoring and alarms via CannonView and SNMP traps (per socket / group and cumulative)
• Sockets have trips / fuses to suit rating of sockets to 60950
• 1 x Temperature sensor input
• 1 x Humidity sensor input
• 2 x CannonGuard bus sockets
• 4 x Digital inputs. 2 x C/O relay outputs (1A@30Vdc)

Order Codes 

Sequential Metered/Monitored Power Distribution Units 

Intelligent metering PDUs that can be Sequentially and Remotely Switched, Metered and Monitored per socket/group.

Features

• Cannon 'Smart' PDUs allow automatic sequential start up and remote control of rack mounted equipment
• Reduces current inrush and nuisance tripping on board
• Saves time and effort when starting complex systems
• 'One click' reboot of all cabinets and equipment from your desk anywhere in the world
• Combined with a Cannon Keypad / Display the system can show the power being used by two Smart PDUs on the door of the cabinet

Specification

• Compliant with BS EN 60950-1:2006,TUV # LO479 & LO480
• 32A Input, EN 60309-1 (16A lead available).
• IEC C13 and C19 Outlets available.
• Switching of individual outlets or groups of outlets
• Automatic sequential startup, configurable order & delay
• Voltage level monitoring
• Current level monitoring (per socket / group and cumulative)
• KWh recording (per socket/group and cumulative)
• Under / over voltage monitoring and alarms via CannonView and SNMP traps
• Under / over current monitoring and alarms via CannonView and SNMP traps (per socket/group and cumulative)
• Sockets have trips / fuses to suit rating of sockets to 60950
• 1 x Temperature sensor input
• 1 x Humidity sensor input
• 2 x CannonGuard bus sockets
• 4 x Digital inputs. 2 x C/O relay outputs (1A@30Vdc)

Smart PDU Options

• 32A versions are standard, 16A plugs or leads available
• Pre set or custom turn on sequence & delay
• Remote Off / On / Reboot.
• Automatic functions - may be configured to:
  • Turn off on Over temperature
  • Turn off sockets on water / smoke alarm
  • SNMP alarms of over / under current / volts
• Various outlet socket combinations available (2 x C19 - 18 x C13 or 4 x C19 & 16 x C13 etc)
• Per outlet / pair of outlet / group of outlet switching and metering versions available
• All outlets protected by trips or fuses in accordance with EN 60950-1:2006
• 1U, 2U or Zero U formats
• 10, 20, 30 ways in any mix of outlets
• Custom mains cable type / length (LSOH etc)

Options

• Under floor solutions: 125, 64 &32A Split load systems, metering & switching
• Custom power monitoring and tailored solutions
• Mixed format, Custom cables, Local power displays, Dual feed, Static and Active transfer switches, tamperproof connector locks
• Secure remote power switching both AC,DC & RF disconnection systems

Order Codes

New Range of Smart Power Distribution Units Coming Soon!