| Location: |
|
Smart Net - Flat Pack
Network Cabling Cabinet
A stylish, cost effective and secure enclosure for network equipment and cabling
Standard features
-
Rugged steel construction
-
Five heights: 25U, 33U, 42U, 45U, 52U
-
Two widths: 600mm, 800mm
-
Two depths: 600mm, 800mm
-
Four infinitely adjustable mounting posts (Universal design will accept all 19-inch equipment)
-
Two drop-in ribbed side panels
-
Vented frame glass front door, which opens 1800 when bayed and 2700 at end of bay or when stand-alone
-
Supplied with swing-handle lock (non-locking versions available)
-
Inset steel rear door, supplied with a cylindrical lock
-
Quick-release hinges on all doors
-
Roof has large capacity cable glands situated at the rear on both sides
-
Cable glands are designed to allow roof panel removal, even when enclosure is fully wired
-
Roof panel is removable for flood wiring
-
Maximum cable access throug hbase
-
Four transit castors fitted
Finish
Standard 1: Powder painted Velvet Black to RAL 9005
Standard 2: Framework painted Dusty Grey to RAL 7037 / Doors & panels painted Grey White to RAL 9002
Other colours available on request
Technical information
- Manufactured (where applicable) to BS.EN60950 2002, IEC 60297, EIA-310-D, UL94V0
- Load rating: 1000kg static (sited directly on floor)
Smart Net Flat Pack consists of 5 boxes - packaged as follows:
Box 1 - Top and Bottom Cover + Fixings (In addition any accessories that may have been ordered)
Box 2 - Corner Posts, Mounting Posts & Infill Panels
Box 3 - Full Height Steel Side Panels
Box 4 - Inset Plain Steel Rear Door
Box 5 - Vented frame glass front door
Please note all boxes will be labelled accordingly and supplied with all relevant assembly instructions and fixings for ease of installation
For further details or if you cannot find what you are looking for please contact Cannon:
+44(0)1425 632600 / Scotland: +44(0)1355 239292
/
|
Copyright © 2005 - 2007 Cannon Technologies Ltd. |
