Quick-Fit Depth Support Members

Cannon Quick-Fit Depth Support Members can be quickly and easily installed, to provide additional support for mounting posts or accessories vertically mounted at the side, such as cable trays or PDU's (Power Distribution Units)

Each end of the depth member is rigidly retained by the internal profile of the cabinet corner post in which it is located. Its height position can be varied as required in 1U increments (to match the punched fixing holes in the 19-inch mounting posts) by sliding it up or down in the corner posts

Quick-Fit Depth Support Members are available in four standard sizes to suit Cannon cabinet depths of 600, 800, 900 and 1000mm

Finish

Powder painted Velvet Black to RAL 9005

Other colours available on request

Supplied: In pairs with four Cannon Quick-Fit Buttons

Quick-Fit Chassis Support Angles

Cannon Quick-Fit Chassis Support Angles simply hook into the depth facing flanges of the 19-inch equipment mounting posts in Cannon cabinets. They are then safety locked into position by a pair of Cannon Quick-Fit buttons in adjacent cut-outs.

These Quick-Fit Chassis Support Angles have been designed such that the equipment surface on each runner coincides with the 'U' pitch lines on the mounting posts. A series of vertical slots have been incorporated in the vertical face of each Quick-Fit Chassis Support Angle for cable lacing purposes, a useful alternative to cable trays if space is at a premium.

Cannon Quick-Fit Chassis Support Angles are available in four depths, which are inter-mixable with any Cannon shelf of the same nominal depth.

Finish

Powder painted Velvet Black to RAL 9005

Other colours available on request

Supplied: In pairs with four Cannon Quick-Fit Buttons

Load rating: 30kg max (evenly distributed)

For further details or if you cannot find what you are looking for please contact Cannon: