Quick-Fit Fixed Shelves

Cannon Quick-Fit Fixed Shelves - one edge hinged relative to the main body of the shelf. Operation of this patented feature with its integral lock, allows fast installation and re-configuration by unskilled personnel.

• The front to back fixing centers of mounting posts in Cannon cabinets is common for all Cannon shelves in each nominal depth, allowing Quick-Fit and traditional shelves to be mixed as required
• Quick-Fit Shelves are pre-punched with ventilation slots 

Finish: Powder painted Velvet Black to RAL 9005. Other colours are available on request.

Load rating: 50kg max (evenly distributed)

Which shelf is suitable for which depth cabinet? 

Please note: Depending on the position/depth of the equipment you are fitting in your cabinet you may require intermediate mounting posts to allow the fitting of shelves. Click here for Intermediate Mounting Posts.

Order Codes - Quick-Fit Fixed Shelves

600mm Wide Quick-Fit Fixed Shelves 

700mm Wide Quick-Fit Fixed Shelves 

800mm Wide Quick-Fit Fixed Shelves 

Quick-Fit Telescopic Shelves

• 
• No more fiddly time consuming effort is required to fit telescopic slide brackets to 19-inch equipment mounting posts with cage nuts, special screws, bar nuts, etc. Instead pre-set brackets which have been factory fitted to the slides, simply clip into the rear and front 19-inch mounting posts
• Cannon Quick-Fit Telescopic Shelves are pre-punched with ventilation slots
• 19-inch Quick-Fit Telescopic Shelves are for use in any width Cannon cabinet where the mounting posts are in the 19-inch equipment position 
• 700mm cabinet, full width Telescopic Shelves (when mounting posts are in 23-inch equipment position)
• 800mm cabinet, full width Telescopic Shelves (when mounting posts are in 27-inch equipment position)
• Plain (unvented) shelves are available to special order

Finish:

Powder painted Velvet Black to RAL 9005. Slides - Bright zinc plated steel. Slide brackets - 1.5mm zintec steel. Other colours are available on request.

Load rating: 40 kg max (evenly distributed)

Additional benefit: Equipment mounting positions are left free when using the Quick-Fit Telescopic Shelves.

Caution: The use of heavy loads on telescopic slides may cause the cabinet to become unstable. Therefore the cabinet should either be bolted to the floor or used with a stabiliser.

Which shelf is suitable for which depth cabinet?

Please note: Depending on the position/depth of the equipment you are fitting in your cabinet you may require intermediate mounting posts to allow the fitting of shelves. Click here for Intermediate Mounting Posts.

Order Codes - Quick-Fit Telescopic Shelves

600mm Wide Quick-Fit Telescopic Shelves 

700mm Wide Telescopic Shelves 

800mm Wide Telescopic Shelves 

Quick-Fit 2U Modem (Cantilever) Shelves

Cannon Quick-Fit 2U Modem Shelves are fitted without cage nuts, screws or cup washers

• They are assembled to the cabinet 19 inch equipment mounting posts by the novel use of pre-formed hooks and 1/8 turn Cannon Quick-Fit Buttons
• They can be assembled or re-located in seconds by unskilled labour without the need for specialist tools or screwdrivers
• These shelves occupy 2U of front panel space and are available in the same range of depths as the more traditional screw-fixed Cannon Modem Shelves

Finish: Powder paintedVelvet Black to RAL 9005. Other colours are available on request.

Supplied: Complete with two Cannon Quick-Fit Buttons.

Load rating: 15kg max (evenly distributed).

Order Codes - Cantilevered (Modem) Shelves