Location:

Products    CannonGuard    CannonSecure    Multi-Function Key-pad

Multi-Function Key-pad

The Multi Function Key-pad provides the three following areas of functionality

Reviewing system parameters with "CannonCheck" - Via Key code number access (E.g. Volts, Amps, temperature, humidity)

Operating any door attached to a local site in "Remote Locking" mode  - Via Key code number access (A local site in accessible via one IP address) 

Operating either the front door, rear door or both doors in "Local Entry" mode (Via Key code number access)

Features

• Local unlocking/locking via 8 unique key codes (codes settable by CannonView when connected to a Rack Monitor/Master Controller)
• Local unlocking of up to 64 doors via the 8 key codes (1 key code will operate up to 8 doors)
• Local monitoring of temperature - see CannonCheck
• Local monitoring of voltage and current - see CannonCheck
• Remote monitoring of valid and invalid key codes via CannonView and SNMP traps
• Audible alarm (approx 70dB)

Specification

• Stand alone, with two lock output

Remote offsite access requires:

• Rack Monitor/Master Controller (which includes Network Interface Card and DC power supply)

Connects with:

The Key-pad can be used as a stand alone application, but where full remote access is required can be interconnected to the Master Controller by way of the communications connectors, and as such each 8-Lock Control Module is fitted with two RJ45 (RJ11 on keypad) - RS485 connectors such that when used in an integrated control system, any additional control modules can easily be connected via a daisy chain method.

Power:

12 - 65Vdc normally supplied from Rack Monitor/Master Controller

Swipe card readers / Biometric readers

Readers of this type can be wired into the Multi-Function Key Pad to enable access via these methods - please contact Cannon for further details.