Location:

Products    CannonGuard    CannonEnvironmental    High Capacity Environmental Control Module

High Capacity Environmental Control Module

Features 

• A high power 6 fan controller for both indoor and outdoor use
• This module can also control Air conditioners / chillers, coolers, heaters and dampers via the 4 off volt free 10Amp relays built into module
• Fan units used are PWM for high efficiency and low power consumption and may be set to alter speed at whatever temperature the customer wishes
• The high capacity fan control module is provided with 4 digital inputs and 4 separate digital outputs for the interconnection and monitoring of blocked filter, smoke and fire alarms or similar equipment 

Specification

• Controlling 6 PWM high capacity fans 4800Cf/m (8000 M³/Hr) total airflow
• 2 x Temperature sensor input with remote monitoring via CannonView and SNMP
• 1 x Humidity sensor input with remote monitoring via CannonView and SNMP
• 4 x Change over relay outputs (8A @ 230Vac)
• 5 x Change over relay outputs (1A @ 30Vdc)
• Over temperature alarms via CannonView and SNMP
• Fan fail alarms via CannonView and SNMP
• Alarm relay outputs (1A @ 30Vdc)
• Sensor failure alarms via SNMP
• Mounted directly into the fan chassis

Requires:

Rack Monitor/Master Controller for remote management

Connects with:

Where full remote control of the module is required it can be interconnected to the Master Controller by way of the communications connectors, and as such each module is fitted with two RJ45 - RS485 connectors such that when used in an integrated system, any additional control modules can easily be connected via a daisy chain method.

Power:

48Vdc supplied from 48V power supply

(Due to the capacity of the fans the High Capacity Environmental Control Module requires its own power source)