Cannon Technologies Group
Products : CannonGuard : CannonSecure

CannonSecureCannonSecure

Provides a range of locks, remote access modules and auditing software that can protect your equipment from unauthorised access. From a simple digital keypad to a full remote access management system CannonSecure is scalable and simple to implement. The system is available with local key or keypad override of the remote system if required.

 

 

 

 


Order Codes

 

CannonGuard Module

Description

Order Code

Rack Monitor - 19" Mounted

Master Controller & power supply encased in 1U Chassis
19-inch Mounted

405E01602105

Rack Monitor - Roof Mounted

Master Controller & power supply - directly roof mounted
Roof mounted into zero 'U' space

405E-NETI-01

Rack Monitor - with 2 Temperature Sensors

Master Controller & power supply encased in 1U Chassis + 2
Temperature Sensors 19-inch Mounted

405E016021T2

Rack Monitor - with 1 Humidity Sensor

Master Controller & power supply encased in 1U Chassis + 1
Humidity Sensor 19-inch Mounted

405E016021H1

Rack Monitor - with 2 Temperature Sensors & 1 Humidity Sensor

Master Controller & power supply encased in 1U Chassis + 2
Temperature Sensors + 1 Humidity Sensor 19-inch Mounted

405E016021T2H1

Integrated: Rack Monitor & 8-Lock Control Module

Master Controller & power supply encased in 1U Chassis + 1 8-Lock Control Module 19-inch Mounted

405E016022100

If you cannot find what you are looking for please call the Cannon Sales Team or click here.

Cannon Electronic Lock

The Cannon Electronic Lock is unique in providing a key override feature as standard which can be invaluable in situations where power fails or third parties may have damaged wiring or electrical actuators.
(This feature may be omitted).


Any unauthorised use of a key will immediately trigger an alarm. Available as Single, 2 point or 3-point locking, as required.

Features

  • Quick conversion of any standard Cannon Smart Door to electronic, Local, Keypad or Remote opening
  • Any Cannon enclosure can be fitted with CannonGuard electronic locks
  • The Cannon Electronic Lock Swing Handle stays in position when electronically released allowing it to be re-locked at any time without local intervention
  • This allows automatic re-locking to take place where the lock has been inadvertently opened remotely
  • There is NO indication on the handle that it is unlocked, this is to prevent 'opportunist' access. ('Pop' out handle available where desired)
  • The lock can be opened and automatically relocked on a selectable time delay of up to 16 hours. (8-Lock)
  • The lock handle is individually alarmed, in series with the door alarm. Therefore, if one or the other is open an alarm will still be raised.
  • The duration that a lock is held open is easily user configurable via CannonView. (8-Lock)
  • The Cannon Electronic Lock can be opened either remotely, or locally with the Cannon Multi-Function Keypad
  • Wiring to the lock is hidden in the Smart Door frame and within the escutcheon mouldings for maximum protection
  • Customer, Site & Contract key sets (including matching side panel locks) available

SpecificationCannon Electronic Lock

  • Large custom swing handle with ergonomic design
  • Takes ½ Euro barrel, Custom keys
  • Easy conversion to 2 or 3 point locking
  • Fitted with integral Swing Handle sensor
  • Door switch sensor, brackets, conduit, connectors and cables included
  • Fully enclosed/tamper-proof electronic locking mechanism
  • Can be used as stand alone, using 3rd party controllers if required
  • Or used in conjunction with a Cannon 8-Lock module and/or Keypad

Requires

  • Keypad or 8-Lock module
  • Or 3rd party lock controller. (Swipe / Rfid / Biometric)
  • Remote control also requires Net/IP or Master Controller

Options

  • Stainless steel swing handle 'anti-vandal' for outside or arduous inside use, takes dd high security barrels
  • Easy conversion to 2 or 3 point locking
  • Fitted with integral locking sensor
  • Fully enclosed water and tamper-proof locking mechanism
  • May be electrically driven by 3rd party lock controllers or Cannon 4 'motor' lock card

 


 

Order Codes

 

CannonGuard Module Description Order Code
Electronic Lock Kit, Connects upto 8 Lock Modules

'E' lock solenoid kit, door switch, cables and connectors for use with Cannon 8-Lock module

405E-LWRE-10                           
Electronic Lock, Stand Alone 3rd Party Control 'E' Lock conversion kit, Solenoid system,Door switch, cables & connectors. Ends in 1M free 'tail' 405E-ELOC-05
Door Switch Door switch kit, includes brackets connectors and cables for 1 door 405E-DRAL-01
Side Panel Switch Side panel switch kit, includes brackets connectors and cables for 1 side panel 405E-SPAL-01
Stainless Steel Swing Handle        (Anti-Vandal) Stainless steel swing handle, no lock barrel. Colour to suit LC118

If you cannot find what you are looking for please call the Cannon Sales Team or click here.

8-Lock Control Module

The 8-way PWM lock control module provides the facility to locally or remotely manage, operate and monitor eight individual electronically operated locks and eight individual alarm circuits. It can unlock doors for pre-programmed times
and automatically relock them after a pre-set delay.

Four digital inputs allow 3rd party lock control. The 8-lock module continuously monitors all of the lock devices and alarm cabling connected to it to check for tampering attempts.

PWM function allows the module to open all 8 locks and hold them open for up to 16 hours - using low power PWM control.

Features

  • Low power PWM control - pluses locks to hold them unlocked without overheating
  • Controls up to 8 Cannon locks, (and most 3rd party lock devices)
  • Remotely monitors up to 8 door status sensors via CannonView and SNMP
  • Locks and wiring condition monitoring via CannonView and SNMP
  • Remote and local intrusion alarm monitoring (buzzer & SNMP)
  • 1 x Temperature sensor input with remote monitoring via CannonView and SNMP
  • 1 x Humidity sensor input with remote monitoring via CannonView and SNMP
  • 4 digital inputs for connection of 3rd party lock control devices, (Rfid / Swipe / Biometric). (Mapable to any doors)
  • 'Open lock' time delay, 5 seconds to 16 hours - settable from CannonView screen
  • 'Unlock all' 'Lock all' function- from keypad or CannonView
  • 'Keypad mapping' function, 64 different 8 digit Keycodes on keypad can unlock doors in any combination / groups, (all fronts, all rears, cabs 1,2,3,4 etc).

Specification

  • 8 x PWM solenoid outputs, 1A 24Vdc
  • 8 x Door sensor inputs, dry - 5v @ 150ma available
  • 4 x Digital inputs, dry - 5V @ 150ma available
  • 2 x Change over relay outputs (1A @ 30Vdc
  • Audible alarm (approx 70dB)
  • 24Vdc 3.75A.
  • Mounting: Zero U in roof of a Cannon Smart cab, 1U x 19 inch housing with Net/IP and other CannonGuard modules available

Requires

  • Net/IP module for remote control
  • Keypad or Keypad/lock combination.
  • 3rd Party lock controller for integration into existing systems
  • Rfid / Swipe or Biometric reader if desired
  • 3rd Party locks for integration into existing systems

Connects with

The module can be used to provide full remote access:

  • A Net/IP or 'Master controller' is required to run CannonView:
    • 2 x RJ45, RS485 'daisy chain' connectors are provided for connection of the CannonGuard data bus
  • Additionally the 8-way lock control module is provided with 4 digital inputs for the interconnection and monitoring of other equipment e.g. 3rd party lock controllers:
    • Rfid / Swipe / Biometric.
  • Also any N/C or N/O switch may be monitored - air conditioning systems, fire detection and UPS systems etc

Power

24Vdc @ 3.75A

 


Order Codes

 

CannonGuard Module Description Order Code
8 Lock Control Module Kit, Roof or 1U Chassis (Each) 8 lock module, connectors, PSU and leads, fits to roof or into a 1U 'master' chassis 405E-8LCK-01                      
Electronic Lock (Each) Single lock conversion kit, includes all brackets, connectors and cables 405E-LWRE-10 

If you cannot find what you are looking for please call the Cannon Sales Team or click here.

Contact: +44 (0)1425 632600 | Email Cannon Technologies | Queensway, New Milton, Hampshire, BH25 5NU, UK accreditation

 


Contact the Cannon Sales Team today


Can't find what you are looking for?
Require a quote?


Contact the Cannon Sales Team

Guest.

Videos | Cabinet Configurator | Contact | Log On

Copyright © 2014 Cannon Technologies Ltd | Terms & Conditions | Privacy Policy | Cookies Policy | Site Map | Mobile Cannon Technologies Ltd on LinkedIn
Powered By Intergage | www.intergage.co.uk