Cable Raceway

The Cannon Cable Raceway is mountable on the roof of any Cannon cabinet or Patching Frame matching the cabinet width

Cannon Cable Raceway will connect to any number of racks or cabinets

Single or multi-tier options

Features & benefits

This cable tray system:

• modular
• no high ladder work is required to install cable routing raceway
• avoids the need for ceiling fixtures
• reduces installation time
• dramatically reduces overall cost
• avoids landlord constraints due to ceiling damage
• provides more scope for changes in room layout
• enables easy cable entry through rack roof  and facilitates cable separation
• provides bend radius control into the rack
• supplied in rack sets, or pre-fitted 
• gangway bridge unit raceway
• in-line raceway links
• raceway will divide into separate sections to accommodate both copper and fibre cable
• all Cable Raceways support a cable load of 100kg evenly distributed, per meter of cable raceway
• Cannon Cable Raceway is supplied in sets which exactly match cabinet widths
• as the raceway and cabinet are connected they can easily be moved together, providing a high degree of flexibility and considerable time saving
• for more cabling capacity or separation use multiple raceways in one system
• brackets position raceway above the cabinet roof and allow one tier, two tier or three tier cable runs. In addition parallel sets of tiers can be installed
• Cannon Cable Raceway does not interfere with the maintenance of roof mounted fan trays
• adjustable cable-retention plates allow any selection of cable exit position along the length of cable raceway, substantially easing cabling drop down

Please select from one of the following:

Gangway Bridge & In-Line Links for Cable Raceway